Exterior Painting Built for Georgia Weather

Almost every failed exterior paint job we get called to repair in metro Atlanta has the same three problems: no power wash before paint, no primer over bare wood, and only one coat of cheap exterior paint. Georgia humidity, summer UV, and pollen-coated surfaces make those shortcuts fail within 18 months. Our exterior painting process eliminates each one: full pressure or soft-wash, hand-scrape every failed edge, spot-prime every bare-wood exposure, and two even coats of premium exterior paint.

We also caulk every siding seam, window perimeter, and trim joint with a 50-year elastomeric caulk before the first coat — water intrusion behind paint is the #1 reason siding rots and exterior paint peels. That single step adds years to the life of an exterior repaint.

Hardie board (fiber cement) is the most common siding in newer Gwinnett County subdivisions. It takes paint beautifully when properly cleaned and primed, and we use 100% acrylic exterior coatings rated for fiber cement — typically Sherwin-Williams Duration or Emerald.

Brick is forgiving but unforgiving of the wrong product. We use breathable masonry coatings (Loxon, SuperPaint Masonry) so trapped moisture can escape — painting brick with a wall paint is a leading cause of efflorescence and peeling. Stucco gets the same breathable approach.

Wood siding, fascia, and trim need the most prep — scraping, sanding, priming bare wood, and two coats of exterior enamel. Most older Lawrenceville and Norcross homes have wood trim that needs this full process, and we don't cut corners on it.

Front doors, garage doors, and shutters take more sun and weather than the rest of the exterior, and they're usually what guests notice first. We pull doors when needed, sand them down to a smooth surface, prime any bare wood or fiberglass, and finish with a premium exterior door enamel in your chosen color — often a saturated accent color that ties the exterior together.